Suspended matrix or difficult phase separations may significantly influence analysis results and system stability.
Ensuring a removal of matrix, or a complete separation of solvents, is therefore critical to many derivatization reactions or to many types of GC- or LC- analysis methods, particularly when large series of samples are analyzed.
Besides, centrifugation is an essential part of many manual sample preparation procedures.
Sample preparation and analysis are performed in parallel thanks to the MAESTRO PrepAhead function for best possible productivity and system utilization.
The GERSTEL MultiPurpose Sampler (MPS) centrifugation option integrates centrifugation into a fully automated sequence as an integral part of the total sample preparation, for example combined with filtration, derivatization, addition of standards and sample introduction.
The centrifuge for general purposes (see picture above). Holds 2 or 10mL vials and can spin these up to: Centrifuge Combi: 2000g; Centrifuge 2 mL: 5000g; Centrifuge 10 mL: 2600g
The centrifuge for advanced purposes. Holds 2 or 10mL vials and can spin these up to 15,000rpm or 25,000g. The centrifuge may also be optionally cooled or heated.
Both centrifuges integrate into the MultiPurpose Sampler (MPS) and are 100% controlled by the MAESTRO software.
Questions, write to Jens Glastrup
Feel free to send us a message via the contact form and we will reply back as soon as possible.
Contact us on firstname.lastname@example.org
Or call our main number
+45 44 53 93 66